CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

VOF free surface vortex simulation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 14, 2011, 09:48
Default VOF free surface vortex simulation
  #1
New Member
 
Mahdi
Join Date: Nov 2010
Posts: 7
Rep Power: 15
mahdiii is on a distinguished road
hi all friends,
I want to simulate free surface vortex due to a suction pipe in a sump.
well I think that I should use VOF modeling in Fluent but I don't know how to define the air above the free surface of the water and so the level of water. should I use seperate zones for each phase or there is a way in VOF modeling to define the level of water and the air above it?
I will be happy if you guide me!

thanks a lot
mahdiii is offline   Reply With Quote

Old   October 14, 2011, 18:51
Default
  #2
New Member
 
PS
Join Date: Aug 2011
Posts: 13
Rep Power: 14
pstreufert is on a distinguished road
Hi - you need to patch in the water zone after initializing with air. You mark the volume you want filled with water at the beginning of the simulation by going to "Adapt" - "Region" - choose the volume, then "Mark", then go back to the initialization screen to patch that area as water.
pstreufert is offline   Reply With Quote

Old   October 15, 2011, 18:59
Default
  #3
New Member
 
Mahdi
Join Date: Nov 2010
Posts: 7
Rep Power: 15
mahdiii is on a distinguished road
Quote:
Originally Posted by pstreufert View Post
Hi - you need to patch in the water zone after initializing with air. You mark the volume you want filled with water at the beginning of the simulation by going to "Adapt" - "Region" - choose the volume, then "Mark", then go back to the initialization screen to patch that area as water.
thanks a lot. it guided me!
mahdiii is offline   Reply With Quote

Old   May 14, 2013, 16:33
Default
  #4
New Member
 
sheikh
Join Date: Apr 2013
Posts: 16
Rep Power: 12
billue123 is on a distinguished road
can you guide me where is the initiatization option? me having the same problem
billue123 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to use VOF with a free surface? alilouu FLUENT 5 November 15, 2011 03:55
free surface flow simulation to a junction flows emily_cx CFX 1 September 21, 2011 20:19
liquid-gas free surface and VOF farne FLUENT 3 February 19, 2009 17:19
Free surface of Step with VOF Azin Sharafeddin FLUENT 1 May 26, 2004 06:24
free convection heat transfer from a heated horizontal surface through a liquid to a thin cooled fin Kaushik FLUENT 1 May 8, 2000 07:47


All times are GMT -4. The time now is 06:49.