Porous boudary condition

forgottenman · November 13, 2011, 14:35

I want to set boundary condition for a porous zone. This porous zone is placed in a fluid zone. I want to find out which boundary condition is appropriate to apply on the interface betwwen fluid and porous zone.
Thanks to All.
"Majid"

shk12345 · November 14, 2011, 03:46

Your problem is not clear
please specify it clearly.

Shk

forgottenman · November 14, 2011, 04:16

I'm simulating a flow of air in a duct. A part of this duct is filled by porous media, so there is a boundary which air needs to interpenetrate and pass over the porous zone. I want to know which type of boundary condition is appropriate for this boundary (interface betwwen pure fluid and porous zone).
Thankyou again.

shk12345 · November 14, 2011, 09:36

If you want to simulate the porous zone there is no need to define any boundary condition there. just make a different zone for it.

fluid zone :: porous zone :: fluid zone

define inertial and viscous resistances in that zone in the porous zone .
You are done

SHK

forgottenman · November 15, 2011, 03:38

It's done
Thankyou so much

November 13, 2011, 14:35	Porous boudary condition	#1
forgottenman New Member Majid Mostafazadeh Join Date: Nov 2011 Posts: 15 Rep Power: 14	I want to set boundary condition for a porous zone. This porous zone is placed in a fluid zone. I want to find out which boundary condition is appropriate to apply on the interface betwwen fluid and porous zone. Thanks to All. "Majid"

November 14, 2011, 03:46	Re:	#2
shk12345 Senior Member shoeb khan Join Date: Nov 2011 Posts: 179 Rep Power: 14	Your problem is not clear please specify it clearly. Shk

November 14, 2011, 09:36	Re	#4
shk12345 Senior Member shoeb khan Join Date: Nov 2011 Posts: 179 Rep Power: 14	If you want to simulate the porous zone there is no need to define any boundary condition there. just make a different zone for it. fluid zone :: porous zone :: fluid zone define inertial and viscous resistances in that zone in the porous zone . You are done SHK

November 15, 2011, 03:38	Re	#5
forgottenman New Member Majid Mostafazadeh Join Date: Nov 2011 Posts: 15 Rep Power: 14	It's done Thankyou so much

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Plot drag forces at porous jump boundary condition	Shim	FLUENT	1	June 5, 2017 04:31
boundary condition in porous zone	lihx	FLUENT	4	August 28, 2010 18:36
Porous wall boundary condition in LES	Henrik	FLUENT	0	May 31, 2007 06:17
outlet boudary condition for a flow in the pipe	Atit	CFX	2	November 9, 2004 17:43
outflow boudary condition in SIMPLE algorithm	dallybird	Main CFD Forum	0	March 6, 2003 11:55

November 14, 2011, 04:16		#3
forgottenman New Member Majid Mostafazadeh Join Date: Nov 2011 Posts: 15 Rep Power: 14	I'm simulating a flow of air in a duct. A part of this duct is filled by porous media, so there is a boundary which air needs to interpenetrate and pass over the porous zone. I want to know which type of boundary condition is appropriate for this boundary (interface betwwen pure fluid and porous zone). Thankyou again.