Patch flow in batch mode

forgottenman · November 24, 2011, 03:21

Hello
I want to simulate a three-phase flow by fluent in batch mode without graphic. I know how the flow can be initialized. This is the script:
............script...........
rc bed.cas
/solve/initialize/initialize-flow
/solve/iterate 100
/file/write-data bed1
exit
yes
..................................
But I need to assign a volume fraction to a zone of my field. It can be done by patch window in fluent. solve/initialize/patch
How can I enter this command to above script?

Amir · November 24, 2011, 07:33

Dear Majid,

Do anything you want by TUI in FLUENT console then put your written commands in TUI in your script.

Bests,

forgottenman · November 25, 2011, 13:10

Dear Amir
I have no idea about that command. It seems like this:
solve/initialize/patch...
but I don't know the exact one.

Amir · November 25, 2011, 14:39

Quote:

Originally Posted by forgottenman

Dear Amir
I have no idea about that command. It seems like this:
solve/initialize/patch...
but I don't know the exact one.

This is:

Code:

/solve/patch

then, enter your domain ID and then variable.
As I said before, examine this procedure in TUI first and then put it in your script!

Bests,

forgottenman · November 26, 2011, 08:42

Thankyou dear Amir
It's done

November 24, 2011, 03:21	Patch flow in batch mode	#1
forgottenman New Member Majid Mostafazadeh Join Date: Nov 2011 Posts: 15 Rep Power: 3	Hello I want to simulate a three-phase flow by fluent in batch mode without graphic. I know how the flow can be initialized. This is the script: ............script........... rc bed.cas /solve/initialize/initialize-flow /solve/iterate 100 /file/write-data bed1 exit yes .................................. But I need to assign a volume fraction to a zone of my field. It can be done by patch window in fluent. solve/initialize/patch How can I enter this command to above script?

November 24, 2011, 07:33		#2
Amir Senior Member Amir Join Date: May 2009 Location: Shiraz, Iran Posts: 719 Blog Entries: 1 Rep Power: 12	Dear Majid, Do anything you want by TUI in FLUENT console then put your written commands in TUI in your script. Bests, __________________ Amir

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem with cyclic boundaries in Openfoam 1.5	fs82	OpenFOAM	28	April 23, 2013 08:35
Cyclic Boundary Condition	Luiz Eduardo Bittencourt Sampaio (Sampaio)	OpenFOAM Running, Solving & CFD	36	July 2, 2012 12:23
Problem with rhoSimpleFoam	matteo_gautero	OpenFOAM Running, Solving & CFD	0	February 28, 2008 06:51
Import gmsh msh to Foam	adorean	Open Source Meshers: Gmsh, Netgen, CGNS, ...	24	April 27, 2005 08:19
Help!! Why I can't run fluent in batch mode?	Cindy Jones	FLUENT	0	April 8, 2003 23:39

November 25, 2011, 13:10		#3
forgottenman New Member Majid Mostafazadeh Join Date: Nov 2011 Posts: 15 Rep Power: 3	Dear Amir I have no idea about that command. It seems like this: solve/initialize/patch... but I don't know the exact one.

November 26, 2011, 08:42		#5
forgottenman New Member Majid Mostafazadeh Join Date: Nov 2011 Posts: 15 Rep Power: 3	Thankyou dear Amir It's done