Phase selection problem in open channel flow

shoumo_30 · November 24, 2011, 16:12

Hello all, i have a rectangular channel, with two inlet and one outlet. one of the inlet discharge hot water while the other one discharges cold water. the inlets are in the opposite direction. it is an open channel flow problem, so the top must be released to the atmosphere. can any one help with the boundary conditions and how many phases should I took in VOF model. One thing it is a 2D problem. It would be very helpful if anybody can help me. Thanks in advance

Zoheb

Philipov · December 1, 2011, 02:48

See tutorial VOF and try to apply to you problem

November 24, 2011, 16:12	Phase selection problem in open channel flow	#1
shoumo_30 New Member Zoheb Nasir Join Date: Nov 2011 Location: London, Ontario Posts: 7 Rep Power: 14	Hello all, i have a rectangular channel, with two inlet and one outlet. one of the inlet discharge hot water while the other one discharges cold water. the inlets are in the opposite direction. it is an open channel flow problem, so the top must be released to the atmosphere. can any one help with the boundary conditions and how many phases should I took in VOF model. One thing it is a 2D problem. It would be very helpful if anybody can help me. Thanks in advance Zoheb

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Open channel flow with stratified flow	k.baker	FLUENT	0	December 3, 2010 03:30
Open Channel Flow Boundary Conditions.	rahulrp	FLUENT	0	December 1, 2010 07:32
Two Phase Darcy flow with gravity -> problem	Cyp	OpenFOAM Programming & Development	0	November 17, 2010 07:58
Problem installing on Ubuntu 9.10 -> 'Cannot open : No such file or directory'	mfiandor	OpenFOAM Installation	2	January 25, 2010 09:50
VOF modelling open channel river flow	Matthew Roberts	FLUENT	6	July 31, 2009 12:52

December 1, 2011, 02:48		#2
Philipov Senior Member Svetlin Filipov Join Date: Mar 2009 Location: United Kingdom Posts: 176 Rep Power: 17	See tutorial VOF and try to apply to you problem