[egge24]

Hi,

I run a steady-state simulation for a porous disk inside a tank. Results of velocity magnitude contours in XY and a XZ planes are shown in fig-1.

Using Surface > Line/Rake I plot velocity results along the X, Y, and Z axis, fig-2, fig-3 and fig-4 respectively. But how I know and how I choose what Y-Z coordinate for the X along plot, X-Z coordinate for the Y along plot, and X-Y coordinate for the Zalong plot?

Thanks in advance.

Regards,

Eduardo


Fig-1: Velocity magnitude contours for XY and XZ planes.


Fig-2: Velocity magnitude along X axis.


Fig-3: Velocity magnitude along Y axis.


Fig-4: Velocity magnitude along Z axis.