CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

How can I set Initial composition of air in the cellar?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 22, 2011, 11:00
Default How can I set Initial composition of air in the cellar?
  #1
New Member
 
Pavel Staša
Join Date: Apr 2010
Location: Czech Republic
Posts: 9
Rep Power: 15
Pavlos is on a distinguished road
Hi guys,

I would like to ask someone for one problem.

Description of my idea:
I´m trying to solve flow of methane through porous media. I attachedd a picture of my idea. There is a cellar in this porous media and there is a small gap (crack) in this cellar. There is a space for stairs, I suppose that it could be a velocity or mass-flow inlet. The air should flow from this inlet to the cellar. All rest sides of cellar are walls.

My idea is that there will be an air in the cellar and methane flow from underground will flow through small crack and it will be mixed with air. I would like to know concentration of methane in the cellar after finishing of solving.

For Inlet of methane I suppose mass-flow inlet.
For Surface I would like to have pressure outlet or outlflow.
Crack is Interior.
Spece for stairs: it could be velocity inlet, pressure-inlet or outlet (I don´t know)

How can I set that there will be an air (21% O2, 1% CO2 and 78% N2) during solution initiatization?
Attached Images
File Type: jpg description.jpg (51.6 KB, 6 views)
Pavlos is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
problem with Min/max rho tH3f0rC3 OpenFOAM 8 July 31, 2019 10:48
SimpleFoam k and epsilon bounded nedved OpenFOAM Running, Solving & CFD 16 March 4, 2017 09:30
Full pipe 3D using icoFoam cyberbrain OpenFOAM 4 March 16, 2011 10:20
Problems with simulating TurbFOAM barath.ezhilan OpenFOAM 13 July 16, 2009 06:55
Convergence moving mesh lr103476 OpenFOAM Running, Solving & CFD 30 November 19, 2007 15:09


All times are GMT -4. The time now is 09:03.