CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Surface Roughness

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 9, 2012, 11:10
Default Surface Roughness
  #1
New Member
 
Tom
Join Date: Jan 2012
Posts: 11
Rep Power: 5
Tom A is on a distinguished road
What do you guys do about the surface roughness settings? I am designing a profile and have no data regarding surface roughness of the material I am using so I am using the default settings in fluent. Is this reasonable or are there better settings for general use?


Tom
Tom A is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with Gmsh nishant_hull Open Source Meshers: Gmsh, Netgen, CGNS, ... 18 April 22, 2015 08:43
nutRoughWallFunction and Surface Roughness Documented AlanR OpenFOAM Programming & Development 47 February 21, 2015 12:37
Surface roughness alefem FLOW-3D 6 June 3, 2010 12:49
Error : Self intersecting surface mesh, computing intersections & Error : Impossible velan Open Source Meshers: Gmsh, Netgen, CGNS, ... 0 June 29, 2009 00:48
CFX4.3 -build analysis form Chie Min CFX 5 July 12, 2001 23:19


All times are GMT -4. The time now is 09:07.