CFD Online URL
[Sponsors]
Home > Forums > FLUENT

prescribe pressure on inner face

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 10, 2012, 15:32
Default prescribe pressure on inner face
  #1
Member
 
Yolk
Join Date: Nov 2011
Posts: 36
Rep Power: 5
Yannian is on a distinguished road
hi,everybody
As the fan model build by ANSYS, I want to prescribe the pressure by myself not using fan model. Because the magitude of pressure is equal on both sides of the disk but I this is not what I want.
I decide to built one face as the disk, and use udf to prescribe pressure jump to make it different on the two sides of the disk. can you tell me how I can achieve it?
Best regards!
Yannian
Yannian is offline   Reply With Quote

Old   January 11, 2012, 00:55
Default
  #2
New Member
 
mahdi karami
Join Date: Aug 2009
Posts: 18
Rep Power: 7
takin is on a distinguished road
Dear Yannian!
really, I did not understand what exactly you want to do. generally, setting the level of pressure at inlet boundries has some limitations. the value of pressure at inlet boundaries are aften resulted from the outlet pressure value.
In fan model, FLUENT asumes a pressure difference between two sides of the surface that yields to a driving force for flow. but if you set the value of pressure manually, no driving force would be generated.
If you get some additional information, I would be able to help you more.
takin is offline   Reply With Quote

Old   January 11, 2012, 04:41
Default
  #3
Member
 
Yolk
Join Date: Nov 2011
Posts: 36
Rep Power: 5
Yannian is on a distinguished road
Dear takin,
The model is a propeller. I want to use disk to simulate it. The fan model used in FLUENT adopt classic actuator disk model. When I checked the pressure jump in this model I found that the pressure was prescribed the same maginute and the opposite sign, such as -5 and 5, so the pressure jump is 10. The propeller I use is not like this situation, the magnitude of pressure must be different, such as -8 and 2, the pressure jump is 10 also.
Yannian is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to set periodic boundary conditions Ganesh FLUENT 13 January 22, 2014 05:11
Maintaining Static Pressure at Fluid Flow Inlet cdevalve FLUENT 3 January 14, 2012 01:11
channelFoam for a 3D pipe AlmostSurelyRob OpenFOAM 3 June 24, 2011 14:06
I want to use pressure of 1 face in udf that compiled on other face iman_1844 Fluent UDF and Scheme Programming 3 June 10, 2010 13:55
Neumann pressure BC and velocity field Antech Main CFD Forum 0 April 25, 2006 03:15


All times are GMT -4. The time now is 01:11.