CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

combustion in fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 14, 2012, 13:22
Default combustion in fluent
  #1
Member
 
Boudour
Join Date: Oct 2011
Posts: 34
Rep Power: 4
roukaia is on a distinguished road
Hi, I am having serious problems with what seems to be a very straight forward problem.

I have 1 inlets and an outlet. Very simple 2-D space model.

I am using the diesel/Air mixture . I have a good model with very good residuals under non-reacting conditions. I have an acceptable adapted mesh.

Problem: I apply species transport :EDDY DISSIPATION MODEL

Solution runs and the temperature increases to 1100K . inindicating combustion

Now, the residuals are good but the solution is not. The pressure inside the chamber does not increase with increasing even propellant mass flux. The only way I can increase the internal chamber pressure is by patching pressure inside the chamber .

I cant work it out and would be extremely grateful of any assistance.
roukaia is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
coal combustion in fluent ramakant FLUENT 1 April 29, 2014 09:40
Limitation of Fluent (Combustion Modeling) Arun FLUENT 5 September 20, 2012 06:09
Combustion SImulation in Fluent santhosh1987 FLUENT 1 May 14, 2010 16:03
combustion in fluent..help ssj FLUENT 1 June 11, 2007 12:54
Fluent error in periodic PDF combustion cases?? George FLUENT 2 March 8, 2004 16:45


All times are GMT -4. The time now is 07:32.