CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Fluent Parallel Processing Issue (http://www.cfd-online.com/Forums/fluent/96517-fluent-parallel-processing-issue.html)

Vijay January 25, 2012 01:02

Fluent Parallel Processing Issue
 
I used to run fluent on parallel mode. Recently, they have re-booted the cluster and I am getting this error below. Previously it was fine. I appreciate if some one can help me. It is urgent. Thank you

/usr/ansys_inc/v130/fluent/fluent13.0.0/multiport/mpi_wrapper/bin/mpirun.fl: line 2074: default_run: command not found

shk12345 January 25, 2012 10:55

which college are you from
this happens after the boot of server
this can help you
try to browse it by using the linux commands in the console you will find it

try to go to licence manager and set the licence preference for the user your name there
click on fluent 13.0 and its done

hope that will help you


All times are GMT -4. The time now is 23:50.