Outflow BC's - Windkessel

Vitaly · February 7, 2012, 15:37

Hello,

I have a couple of questions about Outflow BCs.

In my domain, I have a geometry with a single inlet and multiple outlets.

Periodic waveform describing the flow-rate is specified at the inlet.

I am trying to impose Windkessel BC at the outlet. I am not sure how to deal with the fact that the Pressure depends on the flow-rate and vice versa.

Please give some advice on this issue or, as a best scenario, please recommend something to read that will clear this up.

Thanks in advance!

Vitaly

PranjalNewton · October 19, 2015, 11:10

Hi Vitaly!
Did you find a solution?

February 7, 2012, 15:37	Outflow BC's - Windkessel	#1
Vitaly Member Vitaly Join Date: Jan 2012 Posts: 32 Rep Power: 14	Hello, I have a couple of questions about Outflow BCs. In my domain, I have a geometry with a single inlet and multiple outlets. Periodic waveform describing the flow-rate is specified at the inlet. I am trying to impose Windkessel BC at the outlet. I am not sure how to deal with the fact that the Pressure depends on the flow-rate and vice versa. Please give some advice on this issue or, as a best scenario, please recommend something to read that will clear this up. Thanks in advance! Vitaly

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dealing with BC's in OF 1.6	vkrastev	OpenFOAM Running, Solving & CFD	5	September 4, 2012 11:58
Outflow boundary Control Volume SIMPLE Help !!!	Mizerable	Main CFD Forum	4	August 22, 2011 13:00
Transparent outflow BC's for 1D Euler Eqns	Ashley	Main CFD Forum	0	July 22, 2009 12:02
Outflow vs Pressure Outlet BCs	visuja	FLUENT	1	April 27, 2009 03:58
mass flux correction at outflow boundaries	Subhra Datta	Main CFD Forum	2	November 24, 2003 13:11

October 19, 2015, 11:10		#2
PranjalNewton Member Pranjal Singh Join Date: Sep 2015 Posts: 34 Rep Power: 10	Hi Vitaly! Did you find a solution?