CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Modeling of water sprays (http://www.cfd-online.com/Forums/fluent/97150-modeling-water-sprays.html)

Vijay February 9, 2012 18:45

Modeling of water sprays
 
Hello all: I am planning to model water sprays in ANSYS FLuent 13.0. Can fluent model water sprays by using default atomizers for example: Pressure Swirl Atomizer. I appreciate if any one help in this. Thank you in advance.

aeroboy February 11, 2012 08:29

Yes..you can model water spray with Fluent's in-built atomizer models

Vijay February 11, 2012 17:23

Quote:

Originally Posted by aeroboy (Post 343915)
Yes..you can model water spray with Fluent's in-built atomizer models

Thank you for the reply. I did try model water sprays but I could not validate the pressure swirl atomizer. I have company manufactured data on spray characteristics.


All times are GMT -4. The time now is 06:35.