CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   problem with unwanted faces.. (http://www.cfd-online.com/Forums/fluent/97187-problem-unwanted-faces.html)

alejandro_1980 February 10, 2012 19:00

problem with unwanted faces..
 
when i am trying to connect two meshed volumes that have a common face for conection...(example the cilinder out surface mesh is the same as the hole of a rectangular meshed volume (both face meshes are identical )gambit creates a unwanted wall...

how can i fix that problem with Tgrid???

or what can i do to dissapear that unwanted face???

:eek::confused:

-mAx- February 13, 2012 02:21

no idea with Tgrid (but should be the same as in gambit), but common faces, shold be set as interface, and then in Fluent create grid interfaces by selecting both interfaces

alejandro_1980 February 13, 2012 13:12

regards Max..
 
Quote:

Originally Posted by -mAx- (Post 344062)
no idea with Tgrid (but should be the same as in gambit), but common faces, shold be set as interface, and then in Fluent create grid interfaces by selecting both interfaces

thank you for your asessment Max.. i m wondering. what about the link that you sent me last time?? the one about Tgrid in some chapter of Fluent .. i tried last time and does not work anymore..

thank you anyway...

-mAx- February 14, 2012 08:17

which one?

alejandro_1980 February 14, 2012 22:02

link
 
Quote:

Originally Posted by -mAx- (Post 344323)
which one?

this link...http://cdlab2.fluid.tuwien.ac.at/LEH...ug/node138.htm .. but it is working again.. thank you Max..


All times are GMT -4. The time now is 19:12.