How to display the whole result of a periodic model via one period result?

dixylo · February 16, 2012, 07:49

Hi, all

I have got the simulation result of one period of a periodic model, a impeller-like rotator. Now I want the result of the whole geometry, such as the pressure contour of the rotator wall, the force and moment exerted on the rotator, velocity contour and vectors on a certain cross section and so on.
Could anyone tell me how to expand the result of one period to the entire calculation domain. Thanks in advance, and any help would be much appreciated.

eheywoodlonsdale · February 20, 2012, 11:56

Try using CFD-Post, and use the calculator tab on the tob right, and then function calculator. Or if you're after visuals, try using instancing transforms:

Insert
Instancing Transform
(name)
Untick "Instancing Info From Domain"
# of Copies = however many periodic sections you want
Choose axis
And then full circle

federvo.mala · February 23, 2012, 04:11

You can do it on Fluent too.

In the results section, click to view then define and set rotational.

I can't be more specific as I don't have fluent on hand right now.

Cheers

February 16, 2012, 07:49	How to display the whole result of a periodic model via one period result?	#1
dixylo New Member Join Date: Dec 2011 Posts: 9 Rep Power: 14	Hi, all I have got the simulation result of one period of a periodic model, a impeller-like rotator. Now I want the result of the whole geometry, such as the pressure contour of the rotator wall, the force and moment exerted on the rotator, velocity contour and vectors on a certain cross section and so on. Could anyone tell me how to expand the result of one period to the entire calculation domain. Thanks in advance, and any help would be much appreciated.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LES and combustion model	Margherita Cadorin	CFX	0	October 29, 2008 05:24
Kato-Launder model	sam	Main CFD Forum	13	September 21, 2006 10:15
Why k-epislon model perform a bad result at corner	Lwrence	CFX	13	April 8, 2006 07:46
a problem on Partankar's periodic boundary model	harry	Main CFD Forum	0	June 4, 2005 07:40
Periodic boundary conditions and RSM model	Bart Prast	CFX	15	October 29, 2002 16:38

February 20, 2012, 11:56		#2
eheywoodlonsdale New Member Ed heywood-Lonsdale Join Date: Nov 2011 Posts: 2 Rep Power: 0	Try using CFD-Post, and use the calculator tab on the tob right, and then function calculator. Or if you're after visuals, try using instancing transforms: Insert Instancing Transform (name) Untick "Instancing Info From Domain" # of Copies = however many periodic sections you want Choose axis And then full circle

February 23, 2012, 04:11		#3
federvo.mala Member Join Date: Sep 2011 Location: United Kigdom Posts: 51 Rep Power: 14	You can do it on Fluent too. In the results section, click to view then define and set rotational. I can't be more specific as I don't have fluent on hand right now. Cheers