CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Question about transiet simulations in Fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 18, 2012, 16:17
Default Question about transiet simulations in Fluent
  #1
Member
 
Vitaly
Join Date: Jan 2012
Posts: 32
Rep Power: 14
Vitaly is on a distinguished road
Hello,

Could someone please clarify this for me....

When doing transient simulations in fluent, I set an adaptive time stepping technique (or constant time step, does not matter). I also specify the maximum number of iterations fluent can do in a single time step.

It seems to me that if fluent did not reach a specified error threshold, it should either reduce the time step (if adaptive) and repeat Newton's method again, or just give an error (if constant time step) and stop the simulation. The user should then either ease the error threshold or manually reduce the time step.

Yet, it seems that fluent does the amount of iterations I specified, accepts the solution even if the error threshold did not get reached and proceeds to the next time step. This means that my solution is junk because it's not within error!

Someone please clarify this in case I am not understanding it correctly...

Thank You!

Vitaly
Vitaly is offline   Reply With Quote

Old   February 18, 2012, 16:20
Default
  #2
Senior Member
 
Emre G
Join Date: May 2011
Location: Turkey
Posts: 126
Rep Power: 14
emreg is on a distinguished road
i prefer to select changing time step size myself.

and you have to try that..
emreg is offline   Reply With Quote

Old   February 18, 2012, 16:27
Default
  #3
Member
 
Vitaly
Join Date: Jan 2012
Posts: 32
Rep Power: 14
Vitaly is on a distinguished road
Hi Emreg,

What do you mean by that?
I can either specify an adaptive time step or a constant time step.

Throughout a simulation, fluent is calculating for hundreds of thousands of time steps. Nevertheless, I want to confirm with someone on this thread that each time fluent is carrying out a time step, it is reaching the error threshold I set, or repeating the time step with a different dt.

Thanks,

Vitaly
Vitaly is offline   Reply With Quote

Old   February 19, 2012, 16:49
Default
  #4
Senior Member
 
Join Date: Nov 2010
Location: USA
Posts: 1,232
Rep Power: 24
me3840 is on a distinguished road
Fluent will proceed to the next time step once the maximum number of iterations per timestep (which you define) is reached, regardless of your residual threshold. If you set it to switch to the next dt at e-05, and use a maximum of 20 iterations, and it reaches 20 iterations but is only at e-03, it will stop that time step and continue to the next one anyway.
me3840 is offline   Reply With Quote

Old   February 19, 2012, 19:26
Default
  #5
Member
 
Vitaly
Join Date: Jan 2012
Posts: 32
Rep Power: 14
Vitaly is on a distinguished road
Hi ME3840 thanks for your response.

This seems like a terribly way of doing numerical analysis. Every time step could be accumulating error and I would not over know it, because I can't sit in front of the monitor for 3 days.

Basically, error thresholds set in Fluent are useless when presenting data because you have no idea if it was satisfied.
Vitaly is offline   Reply With Quote

Old   February 19, 2012, 23:06
Default
  #6
Senior Member
 
Join Date: Nov 2010
Location: USA
Posts: 1,232
Rep Power: 24
me3840 is on a distinguished road
Not really. So long as you choose your timestep carefully, you should be okay. If you're just guessing, yes, you'll get pretty bad errors. The error thresholds are there to save you computer time. Why bother doing another 5-6 iterations per timestep when your solution is already converged? Fluent will not iterate until converged per timestep for the same reason - what if your setup is too poor and it never converges for a given timestep, but continues iterating? You would have wasted a large amount of computer time.

Generally you only have to watch the first few. If your timestep is chosen well, then your solution should converge in around 20 iterations. Fluent tends to speed up as the calculation goes on, so the first few usually represent the maximum amount of iterations per timestep that will be taken. If your simulation does not converge in 20 or so iterations, you need to reduce the timestep.
me3840 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Question about modeling an elastic wall in Fluent Mosheraa FLUENT 2 June 24, 2011 19:47
few quesions on ANSYS ICEMCFD and FLUENT Prakash.Paudel ANSYS 0 August 12, 2010 13:07
Fluent Output Data Question fossu15a FLUENT 3 March 30, 2009 20:29
CP values higher than 1 in fluent simulations farhan FLUENT 8 June 22, 2007 10:24
Fluent question Q FLUENT 1 May 5, 2006 19:18


All times are GMT -4. The time now is 14:49.