CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Fluent 13 Interfaces

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 22, 2012, 03:54
Default Fluent 13 Interfaces
  #1
Member
 
felicemastronzo's Avatar
 
Felice
Join Date: Nov 2010
Posts: 43
Rep Power: 6
felicemastronzo is on a distinguished road
Hi all,
I have a problem with the fluent interfaces. I have a domain made by several parts. Each part is meshed independently, so I have a non conformal mesh. On order to connect the volumes, I have used the fluent interfaces (whitout coupled connections). My model is a gearbox with 2 rotating gears inside and a bi-fase flow. The problem is that there is no flow between the different volumes. In the volume in which there are the rotating gears, the mixture has a velocity, in the other volumes (connected to the first one by interfaces) the mixture has no velocity.

Has someone an idea of what can I have made wrong, or if it is a problem of the software?

Regards
F
felicemastronzo is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to open Icem mesh in Ansys Fluent? emmkell FLUENT 26 June 9, 2015 15:38
fluent parallel problem in win7 x64 system dunga82 FLUENT 8 April 19, 2012 20:23
What the differences flow equation of Fluent 6.3 and Fluent 12.1 opehterinar81 FLUENT 0 August 19, 2011 11:55
Fluent 6.3 32bit vs Fluent 12.0 64bit ibex7 FLUENT 7 April 18, 2011 02:44
Master node in parallel computing only distirubtion syadgar FLUENT 1 September 8, 2009 16:41


All times are GMT -4. The time now is 23:37.