CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Cyclone efficiency in DPM

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 28, 2012, 00:31
Default Cyclone efficiency in DPM
  #1
Member
 
arjun
Join Date: Oct 2011
Location: Tokyo, JAPAN
Posts: 66
Rep Power: 14
arjun3020 is on a distinguished road
Hi,

i want to find efficiency of cyclone.
i have following issues.
1. in DPM tab i found three types of Boundary conditions escape, trap,
reflect. for inlet of cyclone i have used trap condition, for dust
outlet i have used trap, for gas outlet i have used escape, for wall i
have used reflect. is is write? (i am not sure for Dust outlet and gas
outlet)

2. how to calculate efficiency?
i have set the injection from inlet in DPM, but i kept it off at the
start of run, after sometime i switch that on.
i have all details of particle size and numbers.

please give me the detail information regarding the same.

if you have some case please share with me.
Thank you for anticipation.
arjun3020 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How can I find collection efficiency of cyclone by fluent? YuTsuYu FLUENT 1 July 2, 2013 16:46
DPM in CYCLONE SEPERATOR nagi FLUENT 6 March 6, 2011 20:59
Droplet Collision Efficiency Calculation using DPM Virk FLUENT 0 January 22, 2010 10:37
problem about DPM of cyclone separator simulation jason FLUENT 4 November 12, 2007 04:15
DPM of cyclone fpingqian FLUENT 3 September 27, 2004 05:35


All times are GMT -4. The time now is 05:37.