# Dynamic Mesh

 Register Blogs Members List Search Today's Posts Mark Forums Read

 March 11, 2012, 04:14 Dynamic Mesh #1 New Member   Join Date: May 2011 Posts: 22 Rep Power: 6 Hi I want do modeling that the body move at one direction by layering method from dynamic mesh in FLUENT 6.3. I use the same UDF that be in User's Guide of fluent. There is one problem during simulation of this case, that the behind cells of body do not split correctly and those stretched, while the cells in front of body, colapse correctly. Despite i change the split and colapse coefficients, do not vary in solution. I will thankful everyone that help me for this problem. Regardly

 March 13, 2012, 08:03 #2 New Member   Join Date: Dec 2011 Location: Spain Posts: 24 Rep Power: 5 try to put spring factor to 0.0.

 March 13, 2012, 23:58 #3 New Member   Join Date: May 2011 Posts: 22 Rep Power: 6 I use the Layering method in Dynamic Mesh with structural mesh. Are you tell that i select spring method plus layering method?

 March 15, 2012, 06:04 Time plot in fluent #4 New Member   rz Join Date: Mar 2012 Posts: 25 Rep Power: 0 Dear friends I m working with fluent 6.3 ,I modelled a wave tank in fluent and I want to get time plot about the history of wave elevation at a specified point for example x=7.5,y=0.5 (in fluent I accentuate this matter again) in a wave tank with these dimensions: L=15m, H=0.8m for a detemined time domain which is smaller than wave tank modeling time domain. if any friend know, plz guide me and give me the tips and tricks about it. With kind regards.

 March 16, 2012, 04:50 #5 New Member   Join Date: Dec 2011 Location: Spain Posts: 24 Rep Power: 5 it worked?

 March 29, 2012, 11:48 tracking water elevation in NWT #6 New Member   rz Join Date: Mar 2012 Posts: 25 Rep Power: 0 what s the meaning of selecting sum in "define surface monitor" for "Phrases" , "volume fraction" . I have a 2 phase domain, primary phase is air and secondary phase is water. I am going to track surface changes for water, in internet i read that I have to select sum when i intoduce monitors/surface/surface monitors/define surface monitor. my case is a Neumerical Wave Tank. please help me.

 Thread Tools Display Modes Linear Mode

 Posting Rules You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is OffTrackbacks are On Pingbacks are On Refbacks are On Forum Rules

 Similar Threads Thread Thread Starter Forum Replies Last Post mas FLUENT 4 May 3, 2012 10:22 herntan FLUENT 15 January 4, 2012 04:31 wlt_1985 FLUENT 1 July 28, 2011 01:53 Manoj Kumar FLUENT 0 August 21, 2007 07:41 BillH FLUENT 4 July 24, 2007 15:31

All times are GMT -4. The time now is 06:56.