CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   assigning phases in fluent (http://www.cfd-online.com/Forums/fluent/99118-assigning-phases-fluent.html)

badaam March 26, 2012 11:43

assigning phases in fluent
 
Hi,
i am using the VOF model in Fluent to model the explosive boiling of liquid nitrogen at 77k when it is injected and mixes with water at 300k. under the cell zone conditions i cant seem to assign different phases to each of the fluid zones.
how do i do this?
there are 3 phases that need to be assigned to 3 different regions of the mesh
https://rapidshare.com/files/1878796...one_4-_air.bmp
https://rapidshare.com/files/1166897...e_5-_water.bmp
https://rapidshare.com/files/5946291...6-nitrogen.bmp


All times are GMT -4. The time now is 05:36.