Home > Forums > Software User Forums > ANSYS > FLUENT

assigning phases in fluent

Mark Forums Read

Reply

Search this Thread

March 26, 2012, 11:43	assigning phases in fluent	#1
badaam New Member adam Join Date: Mar 2012 Posts: 1 Rep Power: 0	Hi, i am using the VOF model in Fluent to model the explosive boiling of liquid nitrogen at 77k when it is injected and mixes with water at 300k. under the cell zone conditions i cant seem to assign different phases to each of the fluid zones. how do i do this? there are 3 phases that need to be assigned to 3 different regions of the mesh https://rapidshare.com/files/1878796...one_4-_air.bmp https://rapidshare.com/files/1166897...e_5-_water.bmp https://rapidshare.com/files/5946291...6-nitrogen.bmp

Reply

« Previous Thread | Next Thread »

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Two questions on Fluent UDF	Steven	Fluent UDF and Scheme Programming	7	March 23, 2018 03:22
Error in reading Fluent 13 case file in fluent 12	apurv	FLUENT	2	July 12, 2013 07:46
Fluent 6.3 32bit vs Fluent 12.0 64bit	ibex7	FLUENT	7	April 18, 2011 02:44
Fluent 12.0 is worst then Fluent 6.2	herntan	FLUENT	5	December 14, 2009 02:57
How to set 2 phases in Fluent: Mixture & Water	JW	FLUENT	7	May 26, 2006 10:10

All times are GMT -4. The time now is 09:20.