CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   incompatibility of frame motion with energy equation activation ? (http://www.cfd-online.com/Forums/fluent/99422-incompatibility-frame-motion-energy-equation-activation.html)

Rockda April 3, 2012 08:01

incompatibility of frame motion with energy equation activation ?
 
Has someone already tried (and suceed) to set up case using Eulerian multiphase model, energy equation activation, and frame motion (or mesh motion) together ?

It seems that there is an incompatibility of the energy activation with the use of a frame motion (cell zone condition panel). After one time step, i always encounter the "segmentation violation" error. As long as i use frame motion without activate the energy equation, or thermal but in static configuration ( no frame motion) everything is ok, but both activated and my case doesnt work anymore.

So if we wanna use boiling model, it has necessarily to be with static geometry condition ?

Any return on this ?

thank you

best regards

Rockda April 3, 2012 08:35

I forgot to precise that i set up a mesh interface in my case in order to allow the conjugate heat transfer between solid and liquid zone. Without mesh interface, i can use energy equation and frame motion together without problem.


All times are GMT -4. The time now is 05:15.