CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Dynamic Gradient Adaptation Help

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 11, 2012, 13:42
Default Dynamic Gradient Adaptation Help
  #1
New Member
 
Join Date: Mar 2012
Posts: 4
Rep Power: 5
mll3261 is on a distinguished road
I am currently trying to dynamically adapt gradients of pressure, density, velocity, and temperature by marking each of my adaptations, and then combining them later in the manage window. Once I combine them I click adapt for the combination, however when the simulation runs it only adapts the last gradient I marked (temperature). I have been able to adapt all four at once previously using the same approach, however recently it seems some of my commands aren't actually going into effect in the software.

If there is something I am not doing correctly please let me know.

Thank you
mll3261 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
local parallel - dynamic gradient adaption yochule FLUENT 0 April 10, 2012 19:43
Dynamic mesh + grid adapt = Crash! (Files included BillH FLUENT 4 July 24, 2007 15:31
Can mesh adaptation be used with dynamic meshing? BillH FLUENT 2 July 22, 2007 16:35
Dynamic Gradient Adaption: Mulitple Field Variable Steve FLUENT 0 July 12, 2005 17:36
Dynamic grid adaptation vipul jindal Main CFD Forum 2 August 31, 2004 05:22


All times are GMT -4. The time now is 00:29.