CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Hardware

Setting up a new CFD lab

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 14, 2010, 21:14
Default Setting up a new CFD lab
  #1
New Member
 
Asit Kumar Mishra
Join Date: Dec 2010
Posts: 4
Rep Power: 15
asitkm is on a distinguished road
Hi guys,
desperately in need of help regarding deciding the hardware configuration for the PC's we are to buy for our new lab.
We are setting up the lab for use in our department of mechanical engineering.
we currently have 20 academic and 5 commercial licences for Ansys 12.0 (including FLUENT and CFX) which would be the prime CFD software we would be installing.
The Ansys 12.0 we have runs on a server - client configuration - upto the meshing is being handled by the client while the server handles the rest.
So for this type of set up, what would your advice be regarding the hardware required? For the academic and commercial (unlimited nodes) version, would we need 2 different servers or can we set them up on the same?
I am currently thinking of core i3, 4 gb ram, 512 MB NVIDIA graphics card (from any of the chipsets that support CUDA), 320 GB hdd for the machines running the academic versions,
core i7, 8 gb ram, 1 gb NVIDIA graphics card, 320 GB hdd for the commercial ones,
core i7, 16 gb ram, 1 gb NVIDIA graphics card (with minimal support of CUDA 2.0) for the server (havnt decided on its hdd - its not going to be a file server, I will be setting up a separate file server).
Please advise as to the configurations.
Nothing is decided as of now and we just have to justify any hardware choices we make for the budgetary purposes.
I would appreciate quick replies.

Thanking you all,
a.
asitkm is offline   Reply With Quote

Old   January 8, 2011, 15:55
Default
  #2
Senior Member
 
Join Date: Oct 2009
Location: Germany
Posts: 636
Rep Power: 21
abdul099 is on a distinguished road
I don't know the limitations of the academic verion, but in my opinion, 4GB ram is not enough. You will need some memory for the operating system, for aditional software, and there will not be much left for meshing.

Also on the servers for the commercial version, 8GB are a little bit low, I continously exceed this amount even when I set up a simple case for myself at home.

In my experience, a slower cpu and a lower graphics card is not that critical, but enough memory is priceless. And hard disk space costs nothing today, so make sure there's enough space available. To save a case with let's say 2 million cells you will need say 2GB, so you can fill a hard disk quickly. (And a nearly full hard disk has a very bad performance due to fragmentation)

But all depends on your budget and how many machines you want to purchase.
abdul099 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cells with t below lower limit Purushothama Siemens 2 May 31, 2010 22:58
Warning 097- AB Siemens 6 November 15, 2004 05:41
ASME CFD Symposium, Atlanta, July 2001 Chris R. Kleijn Main CFD Forum 0 September 13, 2000 05:48
ASME CFD Symposium, Atlanta, July 2001 Chris R. Kleijn Main CFD Forum 0 August 21, 2000 05:49
Which is better to develop in-house CFD code or to buy a available CFD package. Tareq Al-shaalan Main CFD Forum 10 June 13, 1999 00:27


All times are GMT -4. The time now is 08:06.