CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   Fluid-solid flow in pipe model...need help.. (http://www.cfd-online.com/Forums/main/101711-fluid-solid-flow-pipe-model-need-help.html)

Fishburn May 11, 2012 13:07

Fluid-solid flow in pipe model...need help..
 
I have a aproblem to set up the proper model for Fluid-solid Flow in pipe.
I want to simulate the fluid transport ability (density of fluid is less than solid partical), which i will vary flow rate and density to see the proper condition the clean up the solid partical in the pipe....

Please give me the guide line....Thanks in advance

Fishburn May 11, 2012 13:13

My model will use volume fraction inlet as Fluid/solid = 80/20...
as the outlet side, when the velocity of the fluid is not sufficient, some of the solid partical should stay in the bottum of the pipe as stationary layer while some of the solid partical will dispered in the fluid phase.....any ideas....to help Thanks


All times are GMT -4. The time now is 01:21.