CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

thermochemical properties for APCP

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 26, 2012, 17:31
Default thermochemical properties for APCP
  #1
New Member
 
Leon
Join Date: May 2012
Posts: 1
Rep Power: 0
Picard is on a distinguished road
hey, i am currently designing a rocket using a ammonium perchlorate as the oxidizer, aluminium as the fuel and HTPB as the binder, 68%,18%,14% respectively. i have been looking all over th place to try and find the Cp, thermal conductivity (k), and viscosity for this propellant or generally for any APCP and can't find it, as Ansys/Fluent requires these parameters to model my nozzle fluid flow accurately. if anyone could help me get find these values that would be helpful, also the burn rate equation for this propellant would be helpful too

thanks,

Leon
Picard is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mass flow in is not equal to mass flow out saii CFX 12 March 19, 2018 06:21
error message cuteapathy CFX 14 March 20, 2012 07:45
Constant velocity of the material Sas CFX 15 July 13, 2010 09:56
Two-Phase Buoyant Flow Issue Miguel Baritto CFX 4 August 31, 2006 13:02
thermochemical properties format A. Mohamed CFX 4 March 20, 2003 04:20


All times are GMT -4. The time now is 18:14.