Turbulence model on a riser

AntonPDG · June 20, 2012, 10:27

Hi!

I'm working with a FSI project on a riser subjected to VIV using a coupling between Abaqus and Acusolve. I try to find information about appropriate turbulence models for this application or if the flow can be treated as laminar?

/Anton

hellorishi · January 17, 2013, 06:30

Hi Anton,

This is definitely late answer, but from the selection of offshore publications, it could be seen that turbulence models are Spalart Allmaras and Detached Eddy Simulation (DES).

Regards,

June 20, 2012, 10:27	Turbulence model on a riser	#1
AntonPDG New Member Anton Gustafsson Join Date: Jun 2012 Posts: 1 Rep Power: 0	Hi! I'm working with a FSI project on a riser subjected to VIV using a coupling between Abaqus and Acusolve. I try to find information about appropriate turbulence models for this application or if the flow can be treated as laminar? /Anton

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Low Reynolds k-epsilon model	YJZ	ANSYS	1	August 20, 2010 13:57
KOmega Turbulence model from wwwopenFOAMWikinet	philippose	OpenFOAM Running, Solving & CFD	30	August 4, 2010 10:26
Superlinear speedup in OpenFOAM 13	msrinath80	OpenFOAM Running, Solving & CFD	17	August 22, 2009 03:59
SimpleFoam case with SpalartAllmaras turbulence model implemented	nedved	OpenFOAM Running, Solving & CFD	1	November 18, 2008 15:49
SSG Reynolds Turbulence Model	Georges	CFX	1	February 28, 2007 16:15

January 17, 2013, 06:30		#2
hellorishi Senior Member Rishi . Join Date: Mar 2009 Posts: 122 Rep Power: 6	Hi Anton, This is definitely late answer, but from the selection of offshore publications, it could be seen that turbulence models are Spalart Allmaras and Detached Eddy Simulation (DES). Regards,