CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   INavier source code (http://www.cfd-online.com/Forums/main/103657-inavier-source-code.html)

laks June 22, 2012 12:18

INavier source code
 
Hey all.

May be some one can help me. I want to have a look on inavier code and it's immersed boundary method implementation. Sourceforge page (http://sourceforge.net/projects/inavier/) has only very old version of a code.

arjun June 26, 2012 04:17

iNavier issues.
 
The code is now not available because I have joined new company (CD Adapco) and the code was on webpage of old company. So they have taken it down.

I have asked my higher ups in adapco and they have agreed that I can upload whatever available earlier online. So I guess when I have proper internet access I will put everything up again.

Further I got lots of emails too about it and I can not reply due to the reason that I have no internet access at the moment at home and I am not replying personal mails.

Thanks
/Arjun

fwbp34 June 27, 2012 02:11

@Arjun

I've compiled your Code and I spend a bit time to read the code and trying to understand. For playing with it I would need a meshing tool, because I'm doing this in private, Gambit is not an option. Could you recommend a meshing tool that is payable or free?


Andreas

arjun June 27, 2012 09:28

Quote:

Originally Posted by fwbp34 (Post 368469)
@Arjun

I've compiled your Code and I spend a bit time to read the code and trying to understand. For playing with it I would need a meshing tool, because I'm doing this in private, Gambit is not an option. Could you recommend a meshing tool that is payable or free?


Andreas


GiD has mesh converter to fluent format. Its a very good mesh generator. But their free version would only allow very small meshes. It is very cheap mesh generator for what it offers.

Further you shall look for mesh converters that convert into fluent format. I am not sure if gmesh can now export in fluent format or not.

I shall write a mesh converter for iNavier or for fluent. I am always short on time so usually delay this.

Note that the source code does not have immersed boundary module because some of the libraries i am not allowed to share but the exe version shall have immersed boundary, VOF etc on.

I will upload it as soon as i could make another web page. Since now i sit close to milovan (peric), i would ask if he would allow me to upload his codes too because people usually download them too.

chinaduck July 15, 2012 22:53

Hello, all
 
Can you send me the IB code ? Thanks. I am studying the IB method. I have read many papers. But I think it will be better to read some codes. Thanks: My email: is 443618670@qq.com Thanks.

socreate October 9, 2012 23:50

can you send me the code~~ thank you!
sunmine@hotmail.co.uk


All times are GMT -4. The time now is 16:59.