|June 27, 2012, 05:37||
Best mesh-free fluid model?
Join Date: Jun 2012
Posts: 3Rep Power: 6
I wrote a SPH program based on Rama Hoetzlein's fluids v2 which implements a simplified SPH model, fixed particle mass, fixed time step, fixed smoothing length. I got it to simulate simple dam break but it's much harder to adjust it for fluid solid interaction.
systems engineering background, mostly PID controller and CV processing. I am new to CFD with some understanding in FEM. For my purpose I need an efficient fluid model for (possibly real time) fluid-solid interaction for elastic or hard solids. I am mostly looking at Lagrangian methods because from my understanding Eulerian nodes are fixed in place.
I skimmed through some overview the Lagrangian fluid models, but I lack the background to understand the advantage of each model and I am hoping you could point them out and recommend one that's suitable for my use. The ones I came across are eulerian-lagrangian hybrid, optimal transportation meshfree, MLS fluid, and some SPH refinement for density, kernel, viscosity, and acceleration correction
|meshfree, meshless, mls, sph|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Use of k-epsilon and k-omega Models||Jade M||Main CFD Forum||14||September 7, 2016 14:14|
|Error message: Insufficient Catalogue Size||Paresh Jain||CFX||31||June 7, 2016 21:31|
|2D Mesh Generation Tutorial for GMSH||aeroslacker||Open Source Meshers: Gmsh, Netgen, CGNS, ...||12||January 19, 2012 04:52|
|Mesh flattening and fluid assignment not possible.||paka||Open Source Meshers: Gmsh, Netgen, CGNS, ...||6||April 4, 2011 08:53|
|snappyHexMesh won't work - zeros everywhere!||sc298||OpenFOAM Native Meshers: snappyHexMesh and Others||2||March 27, 2011 21:11|