CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

SolidWorks Flow Simulation Probem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 2, 2012, 10:27
Exclamation SolidWorks Flow Simulation Probem
  #1
New Member
 
rajhans
Join Date: Jul 2012
Posts: 1
Rep Power: 0
rhsharma88 is on a distinguished road
Problem Description:
I have a set of nozzles in a unit with a coil on the side. I have problem in defining the boundary conditions for the coil in the software, if someone can help me out with this, I will really appreciate it. The basic diagram is attached wit the thread.
Thanks.
Attached Images
File Type: jpg unit.jpg (30.1 KB, 5 views)
rhsharma88 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Domain format problem on airfoil flow simulation andrenonaka CFX 6 December 4, 2014 04:57
Comparison between Solidworks Flow Simulation and Ansys Fluent Bruce828 Main CFD Forum 5 February 23, 2013 11:13
Blockage in pipe ( using solidwork flow simulation) jchow FloEFD, FloWorks & FloTHERM 1 January 16, 2012 17:03
SolidWorks Flow Simulation Koranten Main CFD Forum 5 October 29, 2010 11:24
Is Solidworks Flow Simulation Good? corriolisforce Main CFD Forum 0 September 14, 2010 10:48


All times are GMT -4. The time now is 19:35.