|
[Sponsors] |
July 2, 2012, 21:58 |
DG with pendant point
|
#1 |
New Member
Join Date: Sep 2011
Posts: 11
Rep Power: 14 |
Hello ,i am working on adaptive DG for hyperbolic problem with triangular mesh. When refining the grid there are some hanging nodes on the cell boundary.when we use slope limiter (proposed by ChiWang Shu)the three neighboring elements are needed and but now there maybe two neighboring elements on one boundary or some boundary is a part of one boundary of another neighboring element . i am puzzled how to implement the slope limiter? is there anyone who knows the answer?
With best regards! |
|
July 7, 2012, 03:45 |
|
#2 |
New Member
Join Date: Sep 2011
Posts: 11
Rep Power: 14 |
it is actually nonconforming mesh. how to implement the slope limiter in DG method?
|
|
July 7, 2012, 04:23 |
Discontinuous Finite Elements
|
#3 |
New Member
Shahzada Khurram
Join Date: Feb 2011
Location: Rawalpindi,Pakistan
Posts: 9
Rep Power: 15 |
Hi,
I am quite well and I hope you will be same there. Anyone study the book of "Ben Q Li,Discontinuous Finite Elements in Fluid Dynamics and Heat Transfer". I want to discuss from that Book. I am very thankful of you. Best Regards |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
problem in toposet | Ahmed Khattab | OpenFOAM Pre-Processing | 27 | March 3, 2023 21:12 |
[blockMesh] error EOF in blockMesh | Ahmed Khattab | OpenFOAM Meshing & Mesh Conversion | 7 | May 17, 2012 00:37 |
block-structured mesh for t-junction | Robert@cfd | ANSYS Meshing & Geometry | 20 | November 11, 2011 04:59 |
[Gmsh] Gmsh and samplesurface | touf | OpenFOAM Meshing & Mesh Conversion | 2 | December 10, 2007 02:27 |
CFX4.3 -build analysis form | Chie Min | CFX | 5 | July 12, 2001 23:19 |