CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Modelling Heat transfer

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 23, 2012, 10:11
Default Modelling Heat transfer
  #1
New Member
 
Lancashire
Join Date: Aug 2012
Posts: 6
Rep Power: 13
khuram87 is on a distinguished road
Hi all...

I am trying to simulate a flow in a ribbed channel

periodic boundary conditions are to be used

i have tried various meshing techniques including the size functions etc but still I am getting very high heat transfer values compared to experiments.

i am using k-eps standard EWT, with energy equation (k-w model apparently doesnt give desired velocity profiles)

if I make the cells too close to the wall, I get an error in fluent that "Aspect ratio is very high for some cells and the default code might not work".

The link to the problem description is (https://www.dropbox.com/sh/4u2y106krwo9knj/X7DaKglhp_)

Please reply ASAP
khuram87 is offline   Reply With Quote

Reply

Tags
fluent, heat transfer, meshing

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Heat transfer (conduction) between two pipes shields FLUENT 14 February 3, 2016 08:45
Water subcooled boiling Attesz CFX 7 January 5, 2013 04:32
Modelling Heat transfer between stack and gas in Thermoacoustic Chirag2302 FLUENT 0 April 24, 2012 02:14
Modelling combustion and heat transfer Tudor FLUENT 4 May 9, 2005 08:02
Heat Transfer Coeff. at Heat Flux Boundary Rushyen CFX 6 January 18, 2001 06:09


All times are GMT -4. The time now is 14:36.