CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   Importing geometry from solidwork to ICEM CFD (http://www.cfd-online.com/Forums/main/106584-importing-geometry-solidwork-icem-cfd.html)

sahil sharma September 2, 2012 13:29

Importing geometry from solidwork to ICEM CFD
 
Hello guys, please help me !

I have made a simple geometry in solidwork, then i saved that geometry in parasolid file. then i open the ICEM CFD and import this geometry to develop the mesh. but, when geometry imported in ICEM CFD window, it comes as 2D and not the 3d.

How can i see the 3d view of this imported geometry???? :confused:

Please help

Thank you

diamondx September 2, 2012 13:31

trying exporting in IGES or STEP...

diamondx September 2, 2012 13:31

i usually find no problem with iges or step

sahil sharma September 2, 2012 13:32

I need quick reply please, as i am stuck at the moment and can not go ahead without see 3d view.

Thanks in advance

diamondx September 2, 2012 13:42

attach your geometry...

sahil sharma September 2, 2012 13:43

Ok Ali, i will check if that works !

Thanks

sahil sharma September 2, 2012 13:55

Ali brother,

Its still the same . again i am getting just 2d view. it is importing and everything is good, but i want 3d view. :(

diamondx September 2, 2012 14:01

when you export to iges , can you send me your file so i can take a look at it


All times are GMT -4. The time now is 17:25.