|November 2, 2012, 05:14||
Flow regime behind the separation
Join Date: Mar 2009
Posts: 85Rep Power: 9
I'm simulating a turbomachine and I observe that the flow separates at a specific point. However behind the separation I don't observe any reverse pressure gradient. And the vectors behind the separation seem undisturbed by the separation.
Do you have any ideas what is going on?
|November 2, 2012, 06:34||
Join Date: Jan 2011
Location: London, U.K.
Posts: 63Rep Power: 7
Are you sure there's separation where you highlighted? Could be simply secondary flow. Please check Prandtl's original definition for flow separation and don't get confused with secondary flow.
One more reliable way to check if there's separation is to examine the (near wall) streamline plot on the blade surfaces, i.e., something like the
second plot in this tecplot link.
|Thread||Thread Starter||Forum||Replies||Last Post|
|k-omega for flow separation||mike.mm||Main CFD Forum||3||October 3, 2011 16:05|
|Flow regime||dvolkind||Main CFD Forum||8||August 16, 2011 13:11|
|Modelling flow separation over airfoil at stall||Kelvin||Main CFD Forum||4||June 6, 2007 17:54|
|Inviscid Drag at subsonic, subcritical Mach #||Axel Rohde||Main CFD Forum||1||November 19, 2001 13:19|
|computation about flow around a yawed cone||Tylor Xie||Main CFD Forum||0||June 9, 1999 07:33|