CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   Monitoring residuals in Workbench-Fluent using Remote Solver (http://www.cfd-online.com/Forums/main/109254-monitoring-residuals-workbench-fluent-using-remote-solver.html)

fadiga November 13, 2012 12:31

Monitoring residuals in Workbench-Fluent using Remote Solver
 
Hi all,

I am rather new to workbench. I am usingmainly Fluent within workbench environment using a remote solver machine for the calculations. In Fluent, after initialisation, and setting up the residual monitor, you run the calculation and you can monitor residuals in real time whilst it runs.

In workbench using the remote solver, I cannot find how to show residuals in real time.

Anyone has any pointers?

Cheers

granzoporo October 16, 2013 14:33

Late answer
 
I guess you solved it in the meanwhile but maybe it'll be useful to someone else :P

You need to go (from the workbench) in Tools->Options->Fluent->Enable Solution Monitoring->OK.
Then you can right-click on the Solution tab and click on Show Solution Monitoring.

fadiga October 16, 2013 15:43

residual monitoring workbench v14.5
 
That's correct.
But actually ANSYS solved it. At the time of posting, I was using workbench v14.0 - the functionality of keeping track of monitors on a remote machine was only introduced with v14.5 - for the record!
Thanks for posting!


All times are GMT -4. The time now is 20:57.