CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

problem about slip in microchannels

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 16, 2012, 11:15
Question problem about slip in microchannels
  #1
New Member
 
ammm
Join Date: Nov 2012
Posts: 20
Rep Power: 4
ammm is on a distinguished road
Hello dear friends I want to simulate a microchannel and I want to put slip flow for it but I donít know how much i should set in specified shear?
How can I put adhesion for it ?there is a phase in microchannel
thank you
ammm is offline   Reply With Quote

Old   November 16, 2012, 20:45
Default
  #2
Senior Member
 
atmcfd's Avatar
 
ATM
Join Date: May 2009
Location: United States
Posts: 104
Rep Power: 8
atmcfd is on a distinguished road
Hi Ammm,
A suggestion:
it would be better if you specify your question more clearly, especially as to what CFD package you are using. You may get more replies from people working in that area!!

Good luck!
a.t.m
atmcfd is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
conduction problem venkataramana OpenFOAM 3 December 1, 2013 08:30
Problem Importing Geometry ProE to CFX fatb0y CFX 3 January 14, 2012 20:42
area does not match neighbour by ... % -- possible face ordering problem St.Pacholak OpenFOAM 9 November 22, 2011 11:02
Adiabatic and Rotating wall (Convection problem) ParodDav CFX 5 April 29, 2007 19:13
Low-Pressure Boundary Slip AlexA FLUENT 1 January 5, 2007 22:30


All times are GMT -4. The time now is 02:03.