|
[Sponsors] |
March 13, 2006, 12:22 |
3d transfinite interpolation
|
#1 |
Guest
Posts: n/a
|
hi every body i did a code to make a mesh by using 3d transfinite interpolation and i test it but i got wrong results for cube geometry, i mean i input the 6 faces data outer boundary, the results is wrong inner grid points. please any material or a code related to my case. sory my english is not good best regrads
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Gmsh] Hex with transfinite Volume | Mjoelnir | OpenFOAM Meshing & Mesh Conversion | 8 | March 30, 2017 09:52 |
Meshing problem | Andrea_85 | OpenFOAM | 1 | January 13, 2011 10:36 |
[Gmsh] boundaries with gmshToFoam | ouafa | OpenFOAM Meshing & Mesh Conversion | 7 | May 21, 2010 13:43 |
Surface interpolation schemes and parallelization | jutta | OpenFOAM Running, Solving & CFD | 0 | February 25, 2010 15:32 |
[Gmsh] GMSH and OpenFOAM | derath | OpenFOAM Meshing & Mesh Conversion | 44 | September 4, 2008 06:09 |