how to check quality of mesh ?

March 13, 2006, 15:49

Hello friends my question is how to check quality of mesh generated using CFX? PLZ reply.

March 14, 2006, 20:23

There are several metrics related to mesh quality (Jacobian, element elongation, aspect ratio, minimal angle). I'm not sure whether CFX has some of these metrics implemented or not but you could use the CFX-post to export an Ensight file with your model, read it in Paraview (http://www.paraview.org) and use the "mesh quality" filter. It could be easily done...

Hope this help

cheers

Renato.

March 13, 2006, 15:49	how to check quality of mesh ?	#1
Vijesh Joshi Guest Posts: n/a	Hello friends my question is how to check quality of mesh generated using CFX? PLZ reply.

March 14, 2006, 20:23	Re: how to check quality of mesh ?	#2
Renato. Guest Posts: n/a	There are several metrics related to mesh quality (Jacobian, element elongation, aspect ratio, minimal angle). I'm not sure whether CFX has some of these metrics implemented or not but you could use the CFX-post to export an Ensight file with your model, read it in Paraview (http://www.paraview.org) and use the "mesh quality" filter. It could be easily done... Hope this help cheers Renato.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Moving mesh	Niklas Wikstrom (Wikstrom)	OpenFOAM Running, Solving & CFD	122	June 15, 2014 06:20
[ICEM] Generating Mesh for STL Car in Windtunnel Simulation	tommymoose	ANSYS Meshing & Geometry	48	April 15, 2013 04:24
[ICEM] trouble with mesh quality from ICEM in CFX Solver	escher25	ANSYS Meshing & Geometry	0	February 28, 2011 07:38
[ICEM] mesh quality problem in fluent	turbotel	ANSYS Meshing & Geometry	0	February 23, 2011 22:24
Icemcfd 11: Loss of mesh from surface mesh option?	Joe	CFX	2	March 26, 2007 18:10