|November 28, 2012, 05:25||
Dynamic mesh in axisymmetric modeling
Join Date: Sep 2011
Posts: 20Rep Power: 6
I tryed to model the oscillating piston in a cylinder using dynamic mesh option.
because of small gap between cylinder and piston I can not used the 3D model due to increasing the number of mesh. so I used 2D-axisymmetric model. but when Fluent want to update the mesh with remeshing option the axis is not deformed and the nagative volume error is shown.
can any one help me?
Do I need another UDF to deform the axis?
Ps.: Negative volume occures in the contraction side of axis.
Contraction side picture is attached.
|Thread||Thread Starter||Forum||Replies||Last Post|
|potentialFreeSurfaceFoam with Dynamic Mesh||GuilhermeMP||OpenFOAM Programming & Development||1||October 6, 2013 03:05|
|Dynamic Mesh on Pintle type injector.||herntan||FLUENT||15||January 4, 2012 04:31|
|snappyHexMesh won't work - zeros everywhere!||sc298||OpenFOAM Native Meshers: snappyHexMesh and Others||2||March 27, 2011 21:11|
|Problem with handling LES modeling with dynamic mesh||g.akbari||OpenFOAM Running, Solving & CFD||0||March 8, 2010 17:18|
|dynamic mesh and sliding mesh||nasser||FLUENT||0||November 1, 2005 03:37|