CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   Velocity inlet within a domain (http://www.cfd-online.com/Forums/main/110650-velocity-inlet-within-domain.html)

Kevin88 December 17, 2012 05:51

Velocity inlet within a domain
 
I am modelling a different temperature upstream and downstream of a simplified choke geometry.
I have modelled a velocity inlet upstream of the choke and a pressure outlet downstream of the choke.
I had then hoped to model the temperature drop across the choke by setting a face (at the choke position) as a pressure outlet on the upstream side and then a velocity inlet on the downstream side of the same face.
I had hoped the shadow wall function in Fluent would have allowed different sides of the same face to be set as a velocity inlet and pressure outlet but the option is not available.
I am modelling my mesh with Design Modeler.
Does anyone know what I should set the wall as in Design Modeler to allow me to model the above?
Thanks in advance for any help


All times are GMT -4. The time now is 04:42.