CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   New User: University Student (http://www.cfd-online.com/Forums/main/111754-new-user-university-student.html)

SAABoy January 14, 2013 17:22

New User: University Student
 
Hi All,

I am a completely new user to Ansys and will be trying to teach myself how to use the software to work on a nozzle optimization project for school. I have access to "Ansys 13.0 Mechanical APDL". Do I need either of the optional CFD packages CFX/Fluent in order to do this type of work?

Thank you,
-SAABoy

Crank-Shaft January 14, 2013 19:29

Welcome to the Forums.

If you are already given all the loads or stresses experienced by the nozzle, then you could simple use Mechanical APDL. However, if you are trying to simulate fluid flow through the nozzle and then analyse the fluid-structure interaction you need access to CFX, Fluent or any other external CFD application.

Hope that helps.


All times are GMT -4. The time now is 21:57.