Vorticity Stream Function on Airfoil

nw_ds · January 25, 2013, 03:47

I am writing a code to solve the laminar flow over an airfoil for ( Re < 100000 ) in Generalized Coord using Stream function vorticity formulation
my code follows this algorithm

1 - Solve the StreamFunction using GS-SOR to tolerance 1e-8
2 - Calculate the Contravariant velocity
3 - Calculate the Vorticity Value at the Airfoil Surface
4- Advance the Vorticity Transport Equation one time step using ( Explicit Euler or ADI )
5- Check Vorticity Convergence else return to step 1

I use a C-grid of 257 x 129 with 129 points on the airfoil surface and min normal spacing of 1e-3 , the grid is Orthogonal on the airfoil surface points are clustered on near the LE ( to capture Circulation ) and TE to Capture seperation.
The values of SF and Vort. are updated on the Cut ( Wake ) by simple average up & down the Cut.

The Problem is that Convergence keeps stalling at points near the LE and I don't know what to do >
by Stalling , I mean that the Convergence of max residual doesn't go down beyond some value .this value changes with Re and time step.
I tried using finer grid but the solver becomes unstable and won't run and I tried using smaller time-step I solve still stalls at the LE

as you see in the second picture the max. Error in Vorticity is stuck at around 0.0035~0.0042 , near the LE ( x = 0.0 , y = 0.0 )

FMDenaro · January 25, 2013, 06:30

first, what do you physically expect from this simulation?
setting Re=O(10^5) while specifyng that the flow is laminar can be misleading... first, is your grid really able to take into account for the low molecular diffusion close to the wall? second, laminar flow can exhibit slowly time-dependent solution. Could you be sure your 2D solution must be really steady? third, check all the tolerances you are using to avoid errors cumulate during time integration

mettler · January 25, 2013, 09:53

what is your BC for the vorticity at the LE. I know that that BC gets a little tricky at the corner of a backwards facing step.

nw_ds · January 26, 2013, 11:53

I found the problem with my my code it turns that it doesn't like first order upwind scheme for convection ( very much ) , I tried second order upwind but I get a converged but in-accurate solution so I tried central differencing and it worked like magic I got an accurate converged solution. But I still want to use an upwind scheme so I am looking for suggestion >

January 25, 2013, 03:47	Vorticity Stream Function on Airfoil	#1
nw_ds New Member Mido Join Date: Mar 2011 Posts: 25 Rep Power: 15	I am writing a code to solve the laminar flow over an airfoil for ( Re < 100000 ) in Generalized Coord using Stream function vorticity formulation my code follows this algorithm 1 - Solve the StreamFunction using GS-SOR to tolerance 1e-8 2 - Calculate the Contravariant velocity 3 - Calculate the Vorticity Value at the Airfoil Surface 4- Advance the Vorticity Transport Equation one time step using ( Explicit Euler or ADI ) 5- Check Vorticity Convergence else return to step 1 I use a C-grid of 257 x 129 with 129 points on the airfoil surface and min normal spacing of 1e-3 , the grid is Orthogonal on the airfoil surface points are clustered on near the LE ( to capture Circulation ) and TE to Capture seperation. The values of SF and Vort. are updated on the Cut ( Wake ) by simple average up & down the Cut. The Problem is that Convergence keeps stalling at points near the LE and I don't know what to do > by Stalling , I mean that the Convergence of max residual doesn't go down beyond some value .this value changes with Re and time step. I tried using finer grid but the solver becomes unstable and won't run and I tried using smaller time-step I solve still stalls at the LE as you see in the second picture the max. Error in Vorticity is stuck at around 0.0035~0.0042 , near the LE ( x = 0.0 , y = 0.0 )

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
foamToTecplot360	thomasduerr	OpenFOAM Post-Processing	121	June 11, 2021 10:05
How to approach calculating a stream function given a velocity profile on a grid	ComFlu	Main CFD Forum	1	October 25, 2009 13:25
Stream Function	Jason T.	FLUENT	2	February 28, 2007 14:43
HELP - stream function from the velocity field	Fred	Main CFD Forum	10	January 26, 1999 12:58
Stream function and vorticity for turbulence flow?	Willard Lee	Main CFD Forum	1	January 20, 1999 11:03

January 25, 2013, 06:30		#2
FMDenaro Senior Member Filippo Maria Denaro Join Date: Jul 2010 Posts: 6,764 Rep Power: 71	first, what do you physically expect from this simulation? setting Re=O(10^5) while specifyng that the flow is laminar can be misleading... first, is your grid really able to take into account for the low molecular diffusion close to the wall? second, laminar flow can exhibit slowly time-dependent solution. Could you be sure your 2D solution must be really steady? third, check all the tolerances you are using to avoid errors cumulate during time integration

January 25, 2013, 09:53		#3
mettler Senior Member Andrew Join Date: Mar 2009 Location: Washington, DC Posts: 209 Rep Power: 18	what is your BC for the vorticity at the LE. I know that that BC gets a little tricky at the corner of a backwards facing step.

January 26, 2013, 11:53		#4
nw_ds New Member Mido Join Date: Mar 2011 Posts: 25 Rep Power: 15	I found the problem with my my code it turns that it doesn't like first order upwind scheme for convection ( very much ) , I tried second order upwind but I get a converged but in-accurate solution so I tried central differencing and it worked like magic I got an accurate converged solution. But I still want to use an upwind scheme so I am looking for suggestion >