CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

cylindrical

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 20, 2006, 19:41
Default cylindrical
  #1
George
Guest
 
Posts: n/a
Hello everybody! I am writing a code for 3D air-flow in a cylinder.The problem that I am facing is how to treat the special characteristic of the cylinder,where at zero and at 360 degrees the grid coincides.Any suggestions?

The code is with finite volumes and collocated.The circumferential direction is the I. At I=1 and I=NI, the cell size is the same as NI-1 and 2 respectively.

Should my solver (TDMA) have any change from the cartesian version?

Thank you
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Finite Volume Method For Cylindrical Coordinates falopsy Main CFD Forum 44 January 15, 2014 03:17
Area of Cylindrical Cutting Planes chegdan OpenFOAM 1 October 6, 2011 15:43
setfileds for cylindrical mesh aki_yafuji OpenFOAM 3 December 9, 2010 22:35
cylindrical coordinate -Gambit noussa ANSYS Meshing & Geometry 2 June 12, 2010 10:07
Cording Ground.for in Cylindrical coordinate J.H. Lee. Phoenics 2 March 28, 2003 05:28


All times are GMT -4. The time now is 12:27.