CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   mass injection in a 2D axi-symmetric problem (http://www.cfd-online.com/Forums/main/11307-mass-injection-2d-axi-symmetric-problem.html)

hyun April 25, 2006 22:50

mass injection in a 2D axi-symmetric problem
 
Hi all.

I have a problem on specifing mass flow rate in a 2d axi-symmetric geometry.

The geometry is axi-symmetric and only half section is considered in my problem.

The liquid fuel will be injected in that region with a specified equivalence ratio.

For 2d planner and 3D, I can specify the desired mass flow rate with respect to the incoming air mass flow rate.

But, I do not know the fuel mass flow rate for 2d axi-symmetric case.

In that case, how can I specify the desired mass flow rate?

Thanks in advance!


Junseok Kim April 26, 2006 00:25

Re: mass injection in a 2D axi-symmetric problem
 
You may send an email with your phone number if you are Korean to me to discuss about it.



All times are GMT -4. The time now is 14:25.