CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

PLEASE, advise: what about wheels on wetted roads

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 12, 2006, 17:33
Default PLEASE, advise: what about wheels on wetted roads
  #1
Freeman
Guest
 
Posts: n/a
Hi all!

I need your experience in resolving a question that came to me after making my final Degree Project. Is there any possibility to make a simulation about a wheel on a wetted road?

I think this simulation would involve a very fine mesh of the tyre tread of course and the presence of both air and a film of water on the road. But I cannot imagine the parameters of the simulation: while air would go around the wheel with a defined velocity, what about the film of water? In this case, I imagine the water moving with the road "wall"...

Could anybody imagine this simulation and how would you set up in a CFD program? By the way, could I calculate the volume of water rejected by the wheel? (in order to see the performance of this wheel under wetted roads)

Thanks a lot for your time and collaboration.

Regards, Freeman.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
rotating wheels Greg FLUENT 6 October 4, 2007 10:51
PLEASE, advise: what about wheels on wetted roads Freeman FLUENT 6 May 22, 2006 17:14
convergence/ advise for permeability study CFDnewbie CFX 0 August 21, 2005 02:50


All times are GMT -4. The time now is 04:42.