which program can be used to simulate to compress water?

arwang · March 30, 2013, 04:41

Everyone,
It is interesting,
I find I cann't do this work,I don't know if the Ansys or Fluent can acomplish this work,in fact,I want to know deformation of the high pressure chamber.
I find it's difficult to set the boundary condition .
just like a hollow steel ball,fill with 100MPa water inside, I want to the deformation when ambient pressure decrease from 100MPa to 0MPa.
the thickness of the steel ball is 20mm.
Could you give me some suggestions?
1. the water is compressible
2. the water inside expands with the ambient pressure decreasing.
There is a balance between the water pressure and the stress of steel ball.

Thank you!
Jiawang

arwang · March 31, 2013, 04:20

Could you give some advices?

March 30, 2013, 04:41	which program can be used to simulate to compress water?	#1
arwang New Member jiawang chen Join Date: Mar 2013 Location: UHM Posts: 2 Rep Power: 0	Everyone, It is interesting, I find I cann't do this work,I don't know if the Ansys or Fluent can acomplish this work,in fact,I want to know deformation of the high pressure chamber. I find it's difficult to set the boundary condition . just like a hollow steel ball,fill with 100MPa water inside, I want to the deformation when ambient pressure decrease from 100MPa to 0MPa. the thickness of the steel ball is 20mm. Could you give me some suggestions? 1. the water is compressible 2. the water inside expands with the ambient pressure decreasing. There is a balance between the water pressure and the stress of steel ball. Thank you! Jiawang

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how can simulate distilation water	mustapha_alg	FLUENT	0	August 5, 2012 06:55
Water Evaporation and condensation modeling	Linjie	FLUENT	3	February 6, 2012 13:08
How to simulate water hammer in pipeline?	Jass	FLUENT	2	December 11, 2008 14:37
How to simulate the water hammer pressure.	arwang	FLUENT	0	March 12, 2007 07:07
about disinfection modeling in water	Joe	FLUENT	3	December 18, 2003 12:58

March 31, 2013, 04:20		#2
arwang New Member jiawang chen Join Date: Mar 2013 Location: UHM Posts: 2 Rep Power: 0	Could you give some advices?