CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

length scales in turbulence

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 22, 2006, 10:34
Default length scales in turbulence
  #1
bajjal
Guest
 
Posts: n/a
In turbulence they do often say flow with wide range of length scales and often say like epsilon equation tends to convect too large length scales ,what is this length scale and why do they relate it with epsilon like terms ,what is the importance of it
  Reply With Quote

Old   May 22, 2006, 12:01
Default Re: length scales in turbulence
  #2
Q
Guest
 
Posts: n/a
Read the introduction of tuebulence.
  Reply With Quote

Old   May 22, 2006, 12:24
Default Re: length scales in turbulence
  #3
diaw
Guest
 
Posts: n/a
What *causes* turbulence? What *sustains* turbulence? What *aggrivates* turbulence?

What *is* turbulence?

Answer those questions & you may well have answered the original length-scale question...

diaw... (Des Aubery)
  Reply With Quote

Old   May 22, 2006, 12:47
Default Re: length scales in turbulence
  #4
bajjal
Guest
 
Posts: n/a
thanks friend's but can u suggest where to read introduction by the way my question is what is the advantage of using length scales cant we proceed or describe turbulence phenomenon without mentioning scales .
  Reply With Quote

Old   May 22, 2006, 14:36
Default Re: length scales in turbulence
  #5
Jonas Larsson
Guest
 
Posts: n/a
Read CFD-Wiki, here is a direct link:

http://www.cfd-online.com/Wiki/Turbulent_length_scale
  Reply With Quote

Old   May 23, 2006, 02:24
Default Re: length scales in turbulence
  #6
Pennysworth
Guest
 
Posts: n/a
Turbulence is characterised by "eddies" of various sizes, ranging from large, determined by the physical boundaries of the flow, to very small, determined by the viscocity of the fluid. The kinetic energy of the turbulence travels from the large eddies pretty much conserved until it reaches the smallest eddies where it is dissipated by viscous effects.

Under equilibrium, the turbulent kinetic energy produced is equal to that dissipated. So, if we can estimate the scale of te large energy-containig eddies, we can use that scale (under equilibrium) to estimate how much is dissipated.

I think one reason why one gets an over-estimated dissipation (length scale) is that there is really a lag between energy showing up at the larger scales and then dissapearing (to heat) at the small scales. So, if you use the "length-scale" (big) to estimate the dissipation (small) you get an over-estimate.

I hope my rambling is not confusing.
  Reply With Quote

Old   May 23, 2006, 06:25
Default Re: length scales in turbulence
  #7
diaw
Guest
 
Posts: n/a
What *causes* the eddies to form in the first place?
  Reply With Quote

Old   May 23, 2006, 08:08
Default Re: length scales in turbulence
  #8
ZubenUbi
Guest
 
Posts: n/a
The exact production term in k equation is -uu.dU/dX. It's show that turbulence grows under the effect of shear stress.

If the question is : why uu is not always equal to zero - which is a solution of Reynolds Average Navier Stokes Equation - I am afraid that no one can answer.

ZubenUbi
  Reply With Quote

Old   May 23, 2006, 08:44
Default Re: length scales in turbulence
  #9
ZubenUbi
Guest
 
Posts: n/a
To complet Pennysworth's message :

k-Eps, as any other 1 point model, is build over the hypothesis of turbulence under equilibrium.

In fact, at the beginning, turbulence energy is produce at large scale by the velocity gradients.

Then this energy is transfer to small scall, throught what is called the Energy cascade.

After that, the energy is dissipated by small scales.

1 point models used to consider that the amount of transfered energy by time unit and the amount dissipated energy by time unit are equals - which happen at equilibrium. This is obvious if we consider the production term in the Eps equation : it is proportional to the k production term.

From another point of vue, that's mean that the dissipation in 1 point model is not the amount of energy dissipated by time unit, but is the amount of energy transfered by time unit.

In shear region, the amount of energy transfered by time unit overestimates the dissipation, in shearless region, it underestimates the dissipation.

3 equations "k_Eps_Phi" models have been developped to correct this, where Phi could be a time scale build over k/Eps and dUdX.

Multiscales models also correct this.

As Pennysworth, hope this is not to confusing,

ZubenUbi
  Reply With Quote

Old   May 24, 2006, 03:19
Default Re: length scales in turbulence
  #10
bajjal
Guest
 
Posts: n/a
Thanks Pennsworth ,ZubenUbi , Jonas , diaw and Q thanks for u r participation in making this clear to me ...regards bajjal
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Turbulence postprocessing Mohsin FLUENT 2 October 3, 2016 15:18
Turbulence length scale and integral length scale rizhang CFX 2 April 22, 2016 08:22
Discussion: Reason of Turbulence!! Wen Long Main CFD Forum 3 May 15, 2009 10:52
turbulence length scales T FLUENT 1 August 13, 2007 16:48


All times are GMT -4. The time now is 13:58.