CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

How to treat the 2D corners when using NSCBC?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 26, 2006, 05:12
Default How to treat the 2D corners when using NSCBC?
  #1
leaf
Guest
 
Posts: n/a
The configuration is free shear flow. The left and right side are nonreflecting inflow conditions and the top boundary condition is nonreflecting outflow conditions.Some parameters are imposed on the bottome inlet.ThankS!
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fluent:How to treat catalyst in surface reaction? gahquq FLUENT 0 June 1, 2010 23:16
how to treat open site in chemical reaction Jiuan FLUENT 0 November 5, 2009 13:40
Avoiding Skew in Tight Corners Marc FLUENT 4 July 23, 2007 16:21
Flow near sharp corners Harish Main CFD Forum 4 February 21, 2007 22:55
how does the fluent treat the cyclic boundary ztdep FLUENT 0 October 18, 2005 09:54


All times are GMT -4. The time now is 21:22.