CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

Lattice Boltzmann .. Moving irregular wall

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 16, 2006, 14:14
Default Lattice Boltzmann .. Moving irregular wall
  #1
Ahmad Al-Zoubi
Guest
 
Posts: n/a
Dear all

My question is about the boundary conditions in LBM. I want to simulate flow through bearings. The geometry consist of two parallel walls. It is easy !!!!! ... BUT the walls are not smooth and they are mooving with constant velocities.

My question is how to deal with moving irregular boundaries?.

Thanks alot

Ahmad
  Reply With Quote

Old   June 29, 2006, 09:54
Default Re: Lattice Boltzmann .. Moving irregular wall
  #2
Raul
Guest
 
Posts: n/a
Hi

Irregular BC is not a problem. If you are not interesting in high order of accuracy, just deal with (full) Bounce Back with 1 order of accuracy. That's all. Otherwise, use half bounce back with 2nd order of accuracy but more computations, as you should know at this point. Regarding moving boundaries, I think, as the first though, you have to use an equation that deal with such "movement". If you are refering to irregular movement, that "equation" should deal with that. Good luck

Cheers Raul
  Reply With Quote

Old   June 29, 2006, 12:14
Default Re: Lattice Boltzmann .. Moving irregular wall
  #3
Ahmad Al-Zoubi
Guest
 
Posts: n/a
Thank you very much for your answer.

I think you didn't understand the question very well. To apply Bounce back for irregular boundaries is very easy task as you have said. The question is what happen if this boundary is moving... This means that the mesh (grid) will change with time. The problem is if one move it one lattice unit length every lattice time step, this will fix the velocity of the boundary to be 1 and this violate the incompressiblity (u<0.3).

Thank you agian.

Ahmad

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fluent3DMeshToFoam simvun OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 48 May 14, 2012 05:20
moving wall on poppet valve?? anwar FLUENT 0 January 19, 2007 12:39
moving wall BC problem Sourabh Main CFD Forum 1 August 8, 2006 07:47
Multicomponent fluid Andrea CFX 2 October 11, 2004 05:12
Values of k & epsilon in the moving wall ghlee Main CFD Forum 1 August 16, 1999 12:42


All times are GMT -4. The time now is 15:30.