CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   Heat Transfer Problem (http://www.cfd-online.com/Forums/main/116745-heat-transfer-problem.html)

elina April 24, 2013 07:53

Heat Transfer Problem
 
3 Attachment(s)
Hallo Friends

I am doing a heat transfer simulation esp Convection between hot fluid and cold Sphere in a channel...I am not able to see any convection between the solid body and the fluid..
the fluid is 370K and the spehre is 300K and I meshed it in Ansys workbench and trying to simulate in Fluent..And for steady state condition am not able to see any change..my outlet temperature seems to be the same 370K or 369.97K dont know why..Can someone help me....guide me please....

MVlahi April 24, 2013 13:27

Interface
 
Hi Elina,

Did you define a solid-fluid contact interface? If not that should solve your problem.

elina April 24, 2013 19:09

hi sir
 
Hallo Sir

In the named Selection I gave all the 4 sides as symmetry and an inlet and Pressure _outlet and just selected the body and assigned as sphere and water for the solid and fluid zone....I hope thats all we have to give...

And in the fluent setup I get the boundry cinditions as these :sphere symmetry,interior_sphere,water _symmetry,interior _water,velocity _inlet,pressure _outlet,sphere_water _wall,sphere_water_wall _shadow

Thats all I am getting and I thought this walls are the contacts....isnt it..??
Kindly help if I am wrong.........


All times are GMT -4. The time now is 17:04.