CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   Problem in meshing the spillway in Gambit (http://www.cfd-online.com/Forums/main/117662-problem-meshing-spillway-gambit.html)

flow_CH May 13, 2013 07:18
Problem in meshing the spillway in Gambit
 
1 Attachment(s)
Hello

I am simulating a ogee spillway with aeration duct into the ramp in FLUENT.
Can you answer me how i should define the grids into the Gambit since
with consider the aeration duct, it is hard to me to define the grids,
because the aerator duct remain out of the boundary zone and the air can not enter it. Please see
attached image.
Thanks

sameben May 13, 2013 07:38
Can you send me the profile of the geometry?

flow_CH May 13, 2013 07:50
1 Attachment(s)
This is profile of spillway.


All times are GMT -4. The time now is 12:37.